EM415PRO Tester 6-42V Autozekering Stroomonderbreker Lijnzoeker

Packaging size: 25.5*12.5*3.5CM, with packaging 290 grams, without packaging 232 grams, shipment does not include batteries Box size: 50 sets per box, 60*41*30CM, 15.5KG FUNCTION: * Tracing of wires is made possible even inside bundles, co- nduits, behind panels, under carpets, upholstery, etc * Easy to use: simply connect the transmitter in series with the circuit or wire under test, i.ein place of a blown fuse, across a connector, in series with an open wire, a light bulb socket, etc., and scanning the circuit/wire with the tracers flexible probe to find the truble spot 42V Ready: for use in the new generation of vehicles mixed or single 42 Volt systems Operates on DC voltages from 6 to 42 volts * Internally protected against power surges and overloads 7 flexible probes allow reaching wires in congested places * Transmitter and Receiver LEDs show open or short circuit conditions * Adjustable sensitivity for all tracing situations * No wire piercing required, non-contact technology! HOW TO USE THE PROBE? The probe of the receiver is made of coiled steel and may be b ent as needed, in order to reach Wires in congested or difficult areasDepending on the circuit characteristics and sensitivity settings, The probe will pick up the signal from the wire in a range of positionsHovever, for the best possible range the Receivers probe tip black cap should be positioned perpendicular at 90 degrees to the wire bing traced and either above or belov it Package List: 1 x Automotive Short and Open Finder 1 x Instruction Manual