Heteluchtlijmpistool met lithium-elektrothermische werking en 11 mm lijmsticks, industrieel pistool, thermische temperatuur, thermo-elektrisch reparatie

Features: 1. This series of products is suitable for rubber strips with a diameter of 11mm. 2. Insert the rubber strip from the end of the glue gun, feed it into the barrel, plug it in, and preheat it for 3-5 minutes. Press the trigger to squeeze out the sol and control the amount of glue. 3. During use, if you can't use one piece of tape at a time, you don't need to remove the tape. You can plug it in for 3-5 minutes and then use it directly. ' 4. This glue gun only needs 3-5 minutes to warm up. After long-term thickening and heating, the product quickly degummed within 15 seconds, with a maximum sunlight temperature of 150 ° C. Over 90% of traditional glue guns. Thanks to the use of a more advanced heating system, you can preheat faster and increase the glue efficiency. 5. Fast unloading, dispensing speed is very fast, smooth and continuous gluing, using copper rubber nozzle, smooth and continuous gluing, durable, rust-proof, nozzle protective cover design, to prevent high temperature burns. The glue gun can spray 0.07 oz /2 g of glue per minute. Specifications: Materials: plastic and alloy Working power: 100W Operating voltage: 100 to 220V Operating temperature: 180℃ Nozzle diameter: 0.070-0.078 inches Preheating time: 3-5 minutes Color: Black Rubber rod diameter: 11x150mm Specifications: European regulations, American regulations Product size 220*190mm Packing list: Hot glue gun *1 Tip: 1. To prevent burns, do not touch the glue solution that comes out of the gun. 2. In order to successfully complete the work, please preheat the glue gun for about 3-5 minutes (preheat time) before use. Attention: The glue stick cannot be removed as soon as it is used.