Nep taxi nep taxi drift bord grappige autosticker populaire Europese en Amerikaanse reflecterende stickers

Product Introduction: 【Brand manufacturer】Didi 【Product Name】FAKE TAXI car sticker 【Product Material】Imported reflective material, waterproof, sunscreen, high temperature resistance 【Product Size】20X5m [Craft] carving 【Quality】Professional independent production, quality assurance. 1. After cleaning the body, spray water with a watering can on the body part to be pasted - mainly to reduce the viscosity of the sticker and facilitate the adjustment of the position.  2. After determining the position that needs to be pasted, remove the transfer film (transparent adhesive film pasted on the reflective sticker) together with the car sticker from right to left [or from top to bottom] and press it on the car meter with a rag.  3. When encountering door handles or anti-collision strips, the material should be cut and wrapped in or loaded according to the situation.  4. After adjusting the general position of the figure in a timely manner, use the scraper to repeatedly scrape off the water and bubbles, and scrape diagonally from right to left when using the scraper; Finally, remove the transparent transfer film.  5. Use a utility knife to separate the door and seams and paste them inward.  6. Try to let the water in the car sticker dry out, and use a hair dryer to heat and dry it moderately if possible. Suggestion: Try not to expose the car to the sun within 24 hours, and do not wash the car within 48 hours.