M.2 harde schijfbehuizing NVME naar USB 3.1 Type-A externe NGFF-protocol PCIe universele SATA solid-state adapter

Product Specifications Product name: NVME/NGFf to USB3.1 type-A/C 2-in-1 direct plug adapter card Supported M.2 SSDs: M.2 NVME protocol drives, NGFF SATA protocol drives Not supported M.2 SSD: PCI-E AHCI protocol Regarding how the ANCI protocol distinguishes: Firstly, the PCI-E AHCI protocol is for SSDs manufactured before 2015. Secondly, there will be a label on the SSD indicating this. If you see the words "PCI-E AHCI," then that's the case.The method of distinction is also very simple Chip: JMS581DL Supports almost 99% of M.2 SSDs currently on the market, only the PCI-E AHCI protocol is not supported External interface: USB3.1 Type-A direct plug interface allows for wire-free use Backwards compatible with USB 3.0 and USB 2.0 interfaces, it supports both USB 2.0 and 3.0 interfaces. Of course, if you connect to 2.0, it will run at 2.0 speed, and if you connect to 3.0, it will run at 3.0 speed Reading speed: 1000MB/s This data is for reference only The actual reading speed is mainly related to the SSD and the device; different SSDs on the same device yield different test results Product Features Since its launch, this product has met customers' purchasing needs. First of all, there is no longer a need to distinguish between different interfaces; whether it's one slot or two, it can be plugged in and used. Secondly, 99% of the M.2 SSDs currently on the market support SATA protocol, and only a small number support NVME and AHCI protocols, which support read and write operations.From now on, there will be no distinction between protocols.You can't go wrong with this model! No matter the specifications, no matter the interface, no matter the protocol, it works! Multiple SSD adapters, all in one adapter card! The packaging is as follows: 1. Adapter card x1 2. Cooling silicone patch x1 3. Screw x1 4. Screwdriver x1 Adapter board size: 11x2.3cm