Erotische speeltjes voor volwassenen: Masturbatiecup voor mannen, realistische rubberen vagina- en prostaatmassagecup, handsfree zuignap, 3D-simulatie seksspeeltjes

Realistic Design Experience lifelike pleasure with the silicone-made realistic rubber vagina, designed for an authentic feel. Manual Control Control your pleasure with manual control, offering personalized sensations. 3D Simulation Immerse yourself in 3D simulation with this adult toy, enhancing your solo sessions. Hands-Free Suction Cup Enjoy hands-free convenience with the built-in suction cup, allowing for hands-free exploration. Safe Material Made with safe materials, this toy guarantees no high-concerned chemicals, ensuring user safety. Steps for usage 1 Open the lidBayonet design, turn it counterclockwise a little to open 2. Add lubricant. Please add a certain amount of lubricant for each use to increase lubrication and stimulate stimulation. 3 fixed suction cupsThe suction cup is fixed on a smooth surface and adjusted to the appropriate posture angle. 4 Insert and useFirst insert your finger into the channel, apply a small amount of lubricant around the entrance, lubricate it with the entrance, and then insert it gently. 5. Insert the vibrator into the hole at the back of the colloid Cleaning steps 1.Take out the colloidJust move your fingers in and out from the side 2.Colloidal cleaningAfter use, please clean it in time and rinse directly with tap water at room temperature; (appropriate amount of shower gel can be added, and the use of alcohol and other chemical agents is prohibited) 3.Dry the waterPlease dry it in time after cleaning. You can use a towel to absorb the water, or store it in a cool place; Note: Do not turn the colloid over for a long time to avoid excessive pulling force and deformation and cracking. Suction cup use 1.Press the switchFind a smooth surface, such as flat tiles, glass, etc., and then press the strong suction switch firmly after adsorption. 2.Adjust the anglePlease loosen the screw first, adjust the angle, and then tighten the screw to fix the angle. 3. Remove the suction cupRelease the strong suction switch and pull up the silicone tongue to remove it