Blues 18 Maan Siliconen IJsblokjesvorm Koude Zeepvorm Creatieve Siliconenvorm Halve Maan Chocoladevorm

Usage steps 1. Mix the cake making ingredients according to the cake making recipe and put them into the silicone cake mold. 2. Put the ingredients according to the shape of the silicone cake mold and shape the cake. 3. Sprinkle chocolate, raisins and other decorations on top of the cake ingredients. 4. Put the silicone cake mold with the ingredients into the oven. 5. After baking, take out the silicone cake mold and let it cool naturally. 6. Take the finished cake out of the silicone mold and demolding is complete. Precautions 1. Please clean the mold for the first use and apply a layer of butter on the mold. This operation can extend the service life of the mold and there is no need to repeat this operation afterwards. 2. Do not directly contact with open flames or heat sources, and do not approach sharp objects. 3. When baking, be sure to place the mold in the oven or in a lower position to avoid the mold being close to the heating part of the oven. 4. When baking is completed, be sure to wear heat insulating gloves or other heat insulating equipment to remove the mold from the oven, and wait for it to cool down before demolding. To demold, please drag the mold and tap the bottom of the mold to easily demold it. 5. Because silicone heats quickly and evenly, the baking time is different from that of traditional metal molds. Please pay attention to adjust the baking time. 6. When cleaning the mold, please do not use steel wool or metal cleaning products to clean the mold to prevent damage to the mold and affect later use. During use, please refer to the oven instructions. Maintenance Method 1. Please clean the silicone mold in time after each use. 2. Do not rinse with cold water immediately after taking it out of the oven to extend its service life. 3. Wash with hot water and diluted edible detergent, or put it in the dishwasher. 4. Do not use corrosive detergents or foam to clean it. 5. Make sure the silicone molds are dry before each use and before storage. 6. When baking, the silicone molds should be placed separately on the flat baking tray. Never let the molds dry out. For example, if you only fill 3 molds of a six piece mold, please fill the other 3 empty molds with clean water. 7. When baking is completed, please remove the entire baking tray from the oven and place the baked products on a cooling rack until they are completely cold. 8. Silicone cake molds, chocolate silicone molds, and ice cube silicone molds can only be used in ovens, toaster ovens, and microwave ovens. They cannot be used directly on gas or electricity, or directly on the heating plate or under the grill. 9. Do not use sharp utensils to scratch the silicone molds, and do not pull them violently. 10. Silicone molds are easy to absorb dust due to static electricity. If they are not used for a long time, please store them in paper boxes in a cool place.